| Goondie 1-30D Mesh |
|
Mesh by name, airy by nature... Goondie Mesh tents are perfect for warmer, more humid climates as their inners are made mostly from mesh, allowing fantastic breathability and air flow. (It also makes the mesh version a bit lighter than the standard alternative.) The vestibules can be rolled halfway up, creating fantastic flow-through ventilation even in the wet, bringing comfort in warmer conditions. Or the inner can be pitched alone for the ultimate in lightweight, cool camping. The 30-denier fly makes this a tad heavier and more durable than the 15-denier option. This is a practical, lightweight, one-person tent that doesn't sacrifice comfort for the sake of saving a few grams. There is plenty of room to sit upright to get changed, as well as storage for gear in both vestibules. The freestanding construction and sturdy floor (no footprint required) make it easy to put up. The overhanging vestibules keep the inside dry even when the fly door is open, while the mid-size YKK zips are easy to reach. All this, and it weighs no more than an apple! Well no, not quite... The Goondie tent series has high-walled, bathtub floors made from hard-wearing, 100 denier PU-coated HT nylon – so tough that a footprint for under the tent is not needed. The Goondie is freestanding, needing a minimum of two pegs to hold the vestibules out. (Two ‘mega pegs’ are included, as well as four alloy pegs for the guy lines.) When not in use, the four storm guys tuck into handy little pockets built into the reinforcing tabs. The Goondie 1-30D fly is made from 30 denier polyester with a silicone/PU coating and is fully factory seam-sealed. It's slightly heavier and sturdier than the 15 denier version, with higher UV resistance, making it better suited for prolonged use. Fly: 30 denier polyester with silicone/PU coating. Colour: orange. Fully factory seam-sealed. Guy-rope pockets built into the reinforcing. (The 30D polyester fly has greater UV resistance and is slightly heavier and more durable than the 15D nylon.) Colour-coded fly tapes indicate fly direction. Inner: a combination of nylon and mesh allows amazing ventilation and breathability. Floor: 100 denier, 5000 millimetre nylon with bathtub construction. High side walls to prevent splash back. Footprint not required. Vestibules: generous overhanging vestibule protects storage area and inner tent even when fly door is open. Smaller vestibule accessible from inside tent only. Freestanding: minimum of two pegs required for vestibules. Poles: DAC Featherlite poles are light, strong and made using a new environmentally friendly anodising process. Pegs: six alloy pegs, including two heavy-duty 'mega pegs'. Zips: YKK mid-size zips for dependability. Guy points: four reinforced storm guys with built-in rope pockets. Venting: tropical venting tabs allow the vestibule to be rolled halfway up for flow-through ventilation. Stuff sack: sturdy 100-denier nylon that will last the life of the tent. Dimensions of floor: 2300 x 800 millimetres Weight: total weight of 1725 grams, or 1585 grams for the inner, fly, poles and two pegs. Made in China.
|
|||||||||||||||||||||||||||||||
